AWK-3131A

AWK-3131A-EUAWK-3131A-EU-TAWK-3131A-SSC-RTG-EU-CT-T

WIRELESS ACCESS POINT

AWK-3131A - Industrial IEEE 802.11a/b/g/n Wireless AP/Bridge/Client

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Wireless Connectivity

These devices have built in wireless interface controllers enabling them to connect to a wireless network.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

5 Year Warranty

These products come with a standard five year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

AWK-3131A Wireless Access Point
AWK-3131AAWK-3131A
From
£564
Free delivery to UK mainland addressesFeatured in:Moxa WirelessWi-Fi Clients for a connected factory

Add to cart / quote list

Buy the AWK-3131A online or add it to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
Price
AWK-3131A-EU

AWK-3131A with EU band, wide operating temperature (-25°C to +60°C)

1-4
£564
FREE DELIVERYBUY
AWK-3131A-EU-T

AWK-3131A with EU band, extended operating temperature (-40°C to +75°C)

1-4
£662
FREE DELIVERYBUY
AWK-3131A-SSC-RTG-EU-CT-T

AWK-3131A with SC optical fibre connector, conformal coating and extended operating temperature (-40°C to +75°C)

1-4
£1581
FREE DELIVERYBUY
Product
Availability
Price
ABC-01

Automatic Backup Configurator

2 in stock
Next day delivery i
1-4
£60
ANT-WDB-ARM-0202+ADP

Wi-Fi External Antenna with SMA connector with Wi-Fi External Antenna with SMA connector and adapter

1 in stock
Next day delivery i
1-4
£7
A-CRF-RMNM-L1-300

LMR-195 LITE cable, N-type (male) to RP SMA (male), 3 meters

1-4
£79
A-CRF-RMNM-L1-600

LMR-195 LITE cable, N-type (male) to RP SMA (male), 6 meters

1-4
£117
A-CRF-RMNM-L1-900

LMR-195 LITE cable, N-type (male) to RP SMA (male), 9 meters

1-4
£183
FREE DELIVERYBUY
ANT-WDB-ARM-02

Dual-band Omni-directional 2.4 and 5GHz Indoor Rubber Duck Antenna

1-4
£6
ANT-WDB-ARM-0202

Wi-Fi External Antenna with SMA connector with Wi-Fi External Antenna with SMA connector

1-4
£6
ANT-WSB-AHRM-05-1.5M

2.4GHz, Omni-directional antenna, 5 dBi, R-SMA (male), magnetic, 1.5 meters

1-4
£18
A-SA-NFNF-01

Surge Arrestor, N-type (female) to N-type (female)

1-4
£49
A-TRM-50-RM

Terminating resistor, 50 ohm, RP-SMA (male)

1-4
£28
WK-51-01

Wall-mounting Kit, 51mm wide

1-4
£14
All prices exclude VAT at current rate.
Minimum order value - £30 (exc. VAT and delivery).
Free delivery of the AWK-3131A to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

AWK-3131A overview

Description
Downloads

The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300Mbps.

The AWK-3131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131A can be powered via PoE to make deployment easier.

The AWK-3131A can operate on either the 2.4GHz or 5GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Impulse are an official Moxa partner and can supply the AWK-3131A, for more information please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features
  • IEEE 802.11a/b/g/n AP/bridge/client support
  • Seamless roaming with Turbo Roaming
  • Complete redundancy with AeroLink Protection
  • Integrated antenna and power isolation
  • 5 GHz DFS channel support
  • -40°C to +75°C operating temperature (on -T version)
Enquire about the AWK-3131A
Need more info or project pricing for the AWK-3131A?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
 
 
 
 

Similar products to the AWK-3131A

+44(0)1782 337 800
Join us for our Industrial Tech Solution Day on 16th April! BOOK NOW
+44(0)1782 337 800