iCON-101CU

CAN TO USB CONVERTER

Fieldbus
iCON-101CU CAN to USB converter
iCON-101CU - 1 Port CAN to USB Converter
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
These products use heatsink, heatpipe and extrusion technology to dissipate the heat generated by the system rather than using traditional fans thus improving system reliability and longevity.
This product supports Linux based kernels. See product datasheet and manual for a list of compatible Linux kernels and distributions (for development and pre-sales support please contact our technical sales team).
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

Add to quote list

Add the iCON-101CU to your quote list to send to our sales team for a quote on all your chosen products
Version information
Stock
Lead time*
Request qty / trade pricing**
iCON-101CU
1 Port CAN to USB Converter (-40°C to +70°C)
No stock
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the iCON-101CU to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

iCON-101CU overview

  • Full compliance with USB 1.1/2.0
  • Full compliance with CAN 2.0A and CAN 2.0B
  • D-sub DB9 CAN port supports 3KV isolation
  • Easily setup to CAN terminator by software configuration
  • CAN transmission speed up to 1Mbps
  • Powered by the USB bus
  • USB type B connector complies with Class 1, DIV II minimum withdrawal requirement of 15N
  • Provides DIN-rail mounting, Status LED indicators
  • Supports Windows Server 2003/2008/Vista/2000/XP/7 and Linux
  • Extended -40°C to +70°C operating temperature
The CAN (Controller Area Network) is a serial bus system and is usually used in structuring intelligent industrial device networks and building smart automatic control systems. The iCON-101CU is a cost-efficient industrial converter for pairs to PC using the standard USB interface.

It supports CAN monitor tool and displays the CAN message received in Decimal or HEX mode. This converter shows the time stamp of each receiving message. The GUI management program and programming guide both are ready for use. The CAN host, monitor or HMI can access and control CAN devices through the iCON-101CU. Operating systems support includes Linux and Windows 98/ME/2000/XP/7.

For more information about the iCON-101CU please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Enquire about the iCON-101CU
Need more info or project pricing for the iCON-101CU?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
GET AN INSTANT QUOTE OR TECH SUPPORT - CHAT NOW
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!