MGate 4101-MB-PBS

MODBUS TO PROFIBUS GATEWAY

Moxa Fieldbus   •  Fieldbus
MGate 4101-MB-PBS Modbus to PROFIBUS Gateway
MGate 4101-MB-PBSMGate 4101-MB-PBS
MGate 4101-MB-PBS - 1 Port RS-232/422/485 Modbus RTU/ASCII to PROFIBUS Slave Gateway
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
Certified to standards relating to equipment for use in applications subject to explosive atmospheres.
4 MGate 4101-MB-PBS versions available
From
£365

Add to cart / quote list

Buy the MGate 4101-MB-PBS online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MGate 4101-MB-PBS
MGate 4101-MB-PBS with standard operating temperature (0°C to +60°C)
£365
MGate 4101-MB-PBS-T
MGate 4101-MB-PBS with extended operating temperature (-40°C to +75°C)
£457
MGate 4101I-MB-PBS
MGate 4101-MB-PBS with 2kV isolation and standard operating temperature (0°C to +60°C)
£432
MGate 4101I-MB-PBS-T
MGate 4101-MB-PBS with 2kV isolation and extended operating temperature (-40°C to +75°C)
£522
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
45W/2A DIN-rail 24V DC power supply with 85V to 264V AC or 120V to 370V DC input (-10C to +50C)
3 in stock
£48
75W/3.2A DIN-rail 24V DC Power Supply with 85V to 264V AC or 120V to 370V DC input (-10C to +60C)
3 in stock
£75
Mini Female DB9 to Terminal Block
14 in stock
£7
120W/5A DIN-rail 24V DC Power Supply with universal 88 to 132V AC or 176 to 264V AC input by switch, or 248-370V DC (-10C to +60C)
£81
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MGate 4101-MB-PBS to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MGate 4101-MB-PBS overview

  • Protocol conversion between Modbus and PROFIBUS
  • 1x RS-232/422/485 Modbus DB9 port with 15kV isolation
  • 1x PROFIBUS DB9 port with 2kV isolation
  • 1x Serial Console RJ45 port
  • Windows utilities with innovative QuickLink function for automatic configuration within minutes
  • Redundant dual DC power inputs and relay output supported
  • Embedded data packet analyzer
  • Powerful and visual diagnostic tool
  • 12V to 48V DC power input
  • -40°C to +75°C operating temperature (on -T versions)
The MGate 4101-MB-PBS gateway provides a communication portal between PROFIBUS PLCs (e.g. Siemens S400 and S300 PLCs) and Modbus devices. With the QuickLink feature, I/O mapping can be accomplished within a matter of minutes. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer optional built-in optical isolation.

The MGate 4101-MB-PBS has dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-PROFIBUS gateways ideal for demanding industrial applications.

The QuickLink windows utility uses a serial console port to connect to the MGate 4101-MB-PBS and makes configuration and operation as easy as possible. QuickLink can finish configuration in just few minutes by passively detecting Modbus requests with the AutoLearning function, and performing error-free I/O mapping with the AutoMapping feature.

QuickLink drastically reduces Modbus-to-PROFIBUS integration time when compared to conventional I/O mapping, which can easily require days to complete.  Additionally, embedded monitoring tools can maintain logs of Modbus communication packets and assist in troubleshooting.

For more information about the MGate 4101-MB-PBS please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Enquire about the MGate 4101-MB-PBS
Need more info or project pricing for the MGate 4101-MB-PBS?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Market
Oil and Gas
Ex certified box PCs, comms and screens, plus project support to help you design and develop complete solutions for rig and ship applications.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!