MGate 5111

MODBUS PROFINET TO PROFIBUS GATEWAY

Moxa Fieldbus   •  Fieldbus
MGate 5111 Modbus PROFINET to PROFIBUS Gateway
MGate 5111 - 1 Port Modbus/PROFINET/EtherNet/IP to PROFIBUS Slave Gateway
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
Certified to standards relating to equipment for use in applications subject to explosive atmospheres.
2 MGate 5111 versions available
From
£347

Add to cart / quote list

Buy the MGate 5111 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MGate 5111
MGate 5111 with standard operating temperature (0°C to +60°C)
No stock
Request L/T
£347
Get qty / trade pricing
Add to cart
MGate 5111-T
MGate 5111 with extended operating temperature (-40°C to +75°C)
No stock
Request L/T
£434
Get qty / trade pricing
Add to cart
View MGate 5111 peripherals
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
Mini DB9F-to-TB
Mini Female DB9 to Terminal Block
20 in stock
Request L/T
£7
Get qty / trade pricing
Add to cart
CBL-F9M9-150
DB9 Female to DB9 Male Serial Cable, 150cm
No stock
Request L/T
£12
Get qty / trade pricing
Add to cart
CBL-F9M9-20
DB9 Female to DB9 Male Serial Cable, 20cm
No stock
Request L/T
£8
Get qty / trade pricing
Add to cart
CBL-PJTB-10
Non-locking Barrel Plug to Bare Wires
No stock
Request L/T
£3
Get qty / trade pricing
Add to cart
CBL-RJ45F9-150
8-pin RJ45 to DB9 Female Cable (150mm)
No stock
Request L/T
£7
Get qty / trade pricing
Add to cart
CBL-RJ45SF9-150
RJ45 to DB9 Female Serial Shielded Cable, 150cm length
No stock
Request L/T
£5
Get qty / trade pricing
Add to cart
WK-51-01
Wall-mounting Kit, 51mm wide
No stock
Request L/T
£15
Get qty / trade pricing
Add to cart
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MGate 5111 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MGate 5111 overview

  • Protocol conversion between Modbus RTU/ASCII/TCP, PROFINET or EtherNet/IP and PROFIBUS
  • 1x RS-232/422/485 serial DB9 port with 2kV isolation
  • 1x PROFIBUS DB9 port with 2kV isolation
  • 2x Ethernet 10/100BaseT RJ45 ports
  • Supports PROFIBUS DP V0 slave
  • Supports PROFINET IO device
  • Supports Ethernet/IP adapter
  • MicroSD card support up to 32GB for configuration backup/duplication and event logs
  • Embedded data packet analyzer
  • Powerful and visual diagnostic tool
  • Supports redundant dual DC power inputs and 1x relay output
  • Security features based on IEC 62443
  • Wide 12V to 48V DC power input
  • Extended -40°C to +75°C operating temperature option (on -T versions)
The MGate 5111 industrial Ethernet gateway converts data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.

MGate 5111s user-friendly interface enables you to set up protocol conversion routines for most applications quickly. Using Quick Setup you can access protocol conversion modes and complete the set up in just a few steps. By supporting a web console and Telnet console the MGate 5111 makes remote maintenance possible. 

The MGate 5111 can connect a new siemens PLC system that supports PROFINET to existing PROFIBUS systems or EtherNet/IP PLC/SCADA systems to PROFIBUS systems.

For more information about the MGate 5111 slave gateway devices please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
MGate 5111 Datasheet
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Enquire about the MGate 5111
Need more info or project pricing for the MGate 5111?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Application
IIoT
We offer a range of solutions to connect devices from the world of operational technology to people, cloud analytics and other 'things'. This is the Industrial Internet of Things.
READ MORE
Market
Manufacturing
Innovative industrial devices and support for manufacturers and integrators.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Follow us
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!