MGate 5111

MGATE 5111-TMGATE 5111


MGate 5111 - 1 Port Modbus/PROFINET/EtherNet/IP to PROFIBUS Slave Gateway


CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.


This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.


Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

5 Year Warranty

These products come with a standard five year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.


Certified to standards relating to equipment for use in applications subject to explosive atmospheres.

MGate 5111 : IN STOCK : Modbus PROFINET to PROFIBUS Gateway
Featured in:Moxa Fieldbus

Request a quote for this product

Enquiry information  
Your name  
Company name  
Email address  

Add to quote list

Add the MGate 5111 to your quote list to send to our sales team for a quote on all your chosen products
MGATE 5111

MGate 5111 with standard operating temperature (0°C to +60°C)

4 in stock
Next day delivery i
MGATE 5111-T

MGate 5111 with extended operating temperature (-40°C to +75°C)


DB9 Female to DB9 Male Serial Cable, 150cm

3 in stock
Next day delivery i

Mini Female DB9 to Terminal Block

53 in stock
Next day delivery i

DB9 Female to DB9 Male Serial Cable, 20cm


Non-locking Barrel Plug to Bare Wires


8-pin RJ45 to DB9 Female Cable (150mm)


RJ45 to DB9 Female Serial Shielded Cable, 150cm length


Wall-mounting Kit, 51mm wide

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

MGate 5111 overview


The MGate 5111 industrial Ethernet gateway converts data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.

MGate 5111s user-friendly interface enables you to set up protocol conversion routines for most applications quickly. Using Quick Setup you can access protocol conversion modes and complete the set up in just a few steps. By supporting a web console and Telnet console the MGate 5111 makes remote maintenance possible. 

The MGate 5111 can connect a new siemens PLC system that supports PROFINET to existing PROFIBUS systems or EtherNet/IP PLC/SCADA systems to PROFIBUS systems.

For more information about the MGate 5111 slave gateway devices please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

  • Protocol conversion between Modbus RTU/ASCII/TCP, PROFINET or EtherNet/IP and PROFIBUS
  • 1x RS-232/422/485 serial DB9 port with 2kV isolation
  • 1x PROFIBUS DB9 port with 2kV isolation
  • 2x Ethernet 10/100BaseT RJ45 ports
  • Supports PROFIBUS DP V0 slave
  • Supports PROFINET IO device
  • Supports Ethernet/IP adapter
  • MicroSD card support up to 32GB for configuration backup/duplication and event logs
  • Embedded data packet analyzer
  • Powerful and visual diagnostic tool
  • Supports redundant dual DC power inputs and 1x relay output
  • Security features based on IEC 62443
  • Wide 12V to 48V DC power input
  • Extended -40°C to +75°C operating temperature option (on -T versions)
Enquire about the MGate 5111
Need more info or project pricing for the MGate 5111?
T: +44 (0)1782 337 800 • E:

Similar products to the MGate 5111

+44(0)1782 337 800
+44(0)1782 337 800