FPM-8151H

STAINLESS STEEL IP65 PANEL-MOUNT LCD

FPM-8151H - 15" Stainless Steel IP65 Panel-mount 1024x768 XGA LCD Display with VGA/DVI and Class 1 Div 2 certification
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The IP rating determines what level of protection a product has against the intrusion of solid objects, water, dust and liquids. This device is IP65 protected at the front from ingress of water jets and dust. To offer complete all round protection the device should be mounted in a suitably protective enclosure or panel.
These products use heatsink, heatpipe and extrusion technology to dissipate the heat generated by the system rather than using traditional fans thus improving system reliability and longevity.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in wide temperature environments. They are capable of running as low as -20C and as high as +70C.
FPM-8151H Stainless Steel IP65 Panel-mount LCD
FPM-8151H rear baseFPM-8151H  sideFPM-8151H back left horizontal
Featured in:Advantech Industrial Displays

Add to quote list

Add the FPM-8151H to your quote list to send to our sales team for a quote on all your chosen products
Version information
Lead time*
Request qty / trade pricing**
FPM-8151H-R3AE
15" Stainless Steel IP65 Panel-mount 1024x768 XGA LCD Display with VGA/DVI and Class 1 Div 2 certification
Peripheral information
Lead time*
Request qty / trade pricing**
Power Cable 3-pin 180cm, Europe type
AC Adapter 100V to 240V, 60W, 12V
* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

FPM-8151H overview

  • 15" TFT LCD display with 1024x768 XGA resolution
  • Stainless steel 316L IP65 rated front bezel
  • -20C to +60C wide operating temperature range
  • Enhanced 5-wire resistive touch screen
  • Direct VGA and DVI-D video input interface
  • Combo USB and RS-232 touch interface
  • Supports 24V DC and 100 to 240V AC input (optional AC adapter)
  • Lockable OSD control panel
  • UL Class 1, Division 2 certified for use in hazardous locations
The FPM-8151H is a rugged and reliable 15” stanless steel 316L LCD display with UL Class 1, Div 2 certification designed for use in hazardous locations such as oil rigs and textile factories.

Equipped with a durable 5-wire resistive touch screen with USB and RS-232 interface, the FPM-8151H is well suited for demanding industrial applications.

For more information about the FPM-8151H LCD display please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Enquire about the FPM-8151H
Need more info or project pricing for the FPM-8151H?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
GET AN INSTANT QUOTE OR TECH SUPPORT - CHAT NOW
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!