MGate 5118

MGate 5118-T

ETHERNET IP GATEWAY

MGate 5118 - 1 Port CAN-J1939 to Modbus/PROFINET/EtherNet/IP Gateway

5 Year Warranty

These products come with a standard five year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

IECEx

Certified to standards relating to equipment for use in applications subject to explosive atmospheres.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

MGate 5118 EtherNet IP Gateway
MGate 5118MGate 5118
From
£429
Free delivery to UK mainland addressesFeatured in:Moxa Fieldbus

Add to cart / quote list

Buy the MGate 5118 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
Price
MGate 5118

MGate 5118 with standard operating temperature (0°C to +60°C)

1-4
£429
FREE DELIVERYBUY
MGate 5118-T

MGate 5118 with extended operating temperature (-40°C to +75°C)

1-4
£539
FREE DELIVERYBUY
Product
Availability
Price
Mini DB9F-to-TB

Mini Female DB9 to Terminal Block

65 in stock
Next day delivery i
10 incoming
1-4
£11
WK-51-01

Wall-mounting Kit, 51mm wide

1-4
£13
All prices exclude VAT at current rate.
Minimum order value - £30 (exc. VAT and delivery).
Free delivery of the MGate 5118 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

MGate 5118 overview

Features
Description
Downloads
  • Protocol conversion between J1939 and Modbus/PROFINET/EtherNet/IP
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Supports J1939 protocol
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • microSD card for configuration backup/duplication and event logs
  • Status monitoring and fault protection for easy maintenance
  • CAN bus and serial port with 2 kV isolation protection
  • -40°C to 75°C wide operating temperature models available
  • Security features based on IEC 62443
The MGate 5118 series industrial protocol gateways support the SAE J1939 protocol, which is based on CANBus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy duty truck industry and backup power systems.

It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.

The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.

For more information about the MGate 5118 gateway please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Enquire about the MGate 5118
Need more info or project pricing for the MGate 5118?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk

Similar products to the MGate 5118

MGate 5111
Modbus PROFINET to PROFIBUS Gateway
  • Protocol: Ethernet/IP, Modbus RTU, Modbu...
  • No. of LAN ports: 2
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended, Standar...
MGate 5103
Modbus to PROFINET Gateway
  • Protocol: Ethernet/IP, Modbus RTU, Modbu...
  • No. of LAN ports: 2
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended, Standar...
EKI-1242EIMS
Modbus Ethernet IP Gateway
  • Protocol: Ethernet/IP, Modbus RTU, Modbu...
  • No. of LAN ports: 4
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
EKI-1242PNMS
Modbus to Profinet Gateway
  • Protocol: Modbus RTU, Modbus TCP, PROFIN...
  • No. of LAN ports: 4
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
MGate 5217
Modbus BACnet IP Gateway
  • Protocol: BACnet, Modbus RTU, Modbus TCP
  • No. of LAN ports: 2
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
EKI-1242BNMS
BACnet IP Gateway
  • Protocol: BACnet, Modbus RTU, Modbus TCP
  • No. of LAN ports: 5
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
EKI-1242ECMS
EtherCAT Fieldbus Gateway
  • Protocol: EtherCAT, Modbus RTU, Modbus T...
  • No. of LAN ports: 4
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
EKI-1242OUMS
Modbus to Fieldbus Gateway
  • Protocol: Modbus RTU, Modbus TCP, OPC UA
  • No. of LAN ports: 4
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended
MGate 5102-PBM-PN
PROFIBUS to PROFINET Gateway
  • Protocol: PROFIBUS, PROFINET
  • No. of LAN ports: 2
  • Operating temperature: Extended, Standar...
  • Serial interface: RS-232
MGate 5101-PBM-MN
PROFIBUS to Modbus Gateway
  • Protocol: Modbus TCP, PROFIBUS
  • No. of LAN ports: 1
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended, Standar...
MGate 4101-MB-PBS
Modbus to PROFIBUS Gateway
  • Protocol: Modbus RTU, PROFIBUS
  • Serial interface: RS-232/422/485
  • Operating temperature: Extended, Standar...
  • No. of LAN ports: None
+44(0)1782 337 800
WE'RE HIRING!If you are looking for a new and exciting challenge please take a look at our recruitment page
C-Tecnics
The support received from Impulse on new solutions is greatly appreciated and highly recommended.
...
Sep 2021
+44(0)1782 337 800