SCM5B392

SERVO MOTOR CONTROLLER MODULE

Dataforth Signal Conditioning Modules  •  Signal Conditioners
SCM5B392 Servo Motor Controller Module
SCM5B392
SCM5B392 - Matched-Pair Servo/Motor Controller 5B Module, 1kHz Bandwidth
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
CSA certification indicates that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognised document used as a basis for certification.
FM approved certification is a standard set by FM Global. Industrial and commercial companies around the world rely on products and services that are FM approved and specification tested to protect their properties from loss. The FM APPROVED mark, which is backed by scientific research and testing, advises customers that the product conforms to the highest standards.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
12 SCM5B392 versions available
From
£142

Add to cart / quote list

Buy the SCM5B392 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
SCM5B392-0111
SCM5B392 with 0 to +5V input, 0 to +5V output, Module Pair
No stock
£280
SCM5B392-0212
SCM5B392 with -5V to +5V input, -5V to +5V output, Module Pair
No stock
£280
SCM5B392-0313
SCM5B392 with 0 to +10V input, 0 to +10V output, Module Pair
No stock
£280
SCM5B392-0414
SCM5B392 with -10V to +10V input, -10V to +10V output, Module Pair
No stock
£280
SCM5B392-01
SCM5B392 with 0 to +5V input, 4mA to 20mA output, Single Module
No stock
£142
SCM5B392-02
SCM5B392 with -5V to +5V input, 4mA to 20mA output, Single Module
No stock
£142
SCM5B392-03
SCM5B392 with 0 to +10V input, 4mA to 20mA output, Single Module
No stock
£142
SCM5B392-04
SCM5B392 with -10V to +10V input, 4mA to 20mA output, Single Module
No stock
£142
SCM5B392-11
SCM5B392 with 4mA to 20mA input, 0 to +5V output, Single Module
No stock
£142
SCM5B392-12
SCM5B392 with 4mA to 20mA input, -5V to +5V output, Single Module
No stock
£142
SCM5B392-13
SCM5B392 with 4mA to 20mA input, 0 to +10V output, Single Module
No stock
£142
SCM5B392-14
SCM5B392 with 4mA to 20mA input, -10V to +10V output, Single Module
No stock
£142
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
DIN Rail Base Element without Snap Foot
30 in stock
£11
DIN Rail Connection Pins (4 required)
49 in stock
£3
16 Channel 5B Backpanel, Non-Multiplexed with CJC
No stock
£448
16 Channel 5B Backpanel, Non-Multiplexed with no CJC
No stock
£371
16 Channel 5B Backpanel, Non-Multiplexed with DIN rail mount, CJC
No stock
£478
16 Channel 5B Backpanel, Non-Multiplexed with DIN rail mount, no CJC
No stock
£402
16 Channel 5B Backpanel, Multiplexed with CJC
No stock
£468
16 Channel 5B Backpanel, Multiplexed with no CJC
No stock
£390
16 Channel 5B Backpanel, Multiplexed with DIN rail mount, CJC
No stock
£500
16 Channel 5B Backpanel, Multiplexed with DIN rail mount, no CJC
No stock
£421
Single Channel 5B Backpanel with CJC
No stock
£63
Single Channel 5B Backpanel with DIN rail mount, CJC
No stock
£80
Dual Channel 5B Backpanel with CJC
No stock
£90
Dual Channel 5B Backpanel with no CJC
No stock
£79
Dual Channel 5B Backpanel with DIN rail mount, CJC
No stock
£107
Dual Channel 5B Backpanel with DIN rail mount, no CJC
No stock
£95
8 Channel 5B Backpanel, Non-Multiplexed with CJC
No stock
£334
8 Channel 5B Backpanel, Non-Multiplexed with no CJC
No stock
£294
8 Channel 5B Backpanel, Non-Multiplexed with DIN rail mount, CJC
No stock
£350
8 Channel 5B Backpanel, Non-Multiplexed with DIN rail mount, no CJC
No stock
£312
8 Channel 5B Backpanel, Multiplexed with CJC
No stock
£351
8 Channel 5B Backpanel, Multiplexed with no CJC
No stock
£314
8 Channel 5B Backpanel, Multiplexed with DIN rail mount, CJC
No stock
£367
8 Channel 5B Backpanel, Multiplexed with DIN rail mount, no CJC
No stock
£325
8 Channel 5B Backpanel, High Density with CJC
No stock
£333
8 Channel 5B Backpanel, High Density with no CJC
No stock
£293
8 Channel 5B Backpanel, High Density with DIN rail mount, CJC
No stock
£395
8 Channel 5B Backpanel, High Density with DIN rail mount, no CJC
No stock
£354
DIN Rail Base Element with Snap Foot
No stock
£11
SCM5B Encapsulated Cold Junction Compensation Sensor (MOQ 50pcs)
No stock
£26
Analog Module Evaluation Board
No stock
£119
4A Fuse for SCMPB01/02 Backplane, Pack of 10
No stock
£18
Universal Interface Board for SCM5B/7B Backpanels with no DIN rail mount
No stock
£82
Universal Interface Board for SCM5B/7B Backpanels with DIN rail mount
No stock
£88
Jumper Strap for SCMPB01 Backplane, Pack of 10
No stock
£8
220V AC Power Supply (1A @ 5V DC) with no DIN rail mount
No stock
£305
220V AC Power Supply (1A @ 5V DC) with DIN rail mount
No stock
£335
220V AC Power Supply (6A @ 5V DC)
No stock
£560
110V AC Power Supply (1A @ 5V DC) with no DIN rail mount
No stock
£286
110V AC Power Supply (1A @ 5V DC) with DIN rail mount
No stock
£313
110V AC Power Supply (6A @ 5V DC)
No stock
£560
Current Conversion Resistor for SCM5B32/42 Module
No stock
£12
EN50022-35 Gull Wing DIN Rail, Length 2M
No stock
£66
EN50035-G32 G Style DIN Rail, Length 2M
No stock
£103
EN50022-35x15 Gull Wing DIN Rail, Length 2M
No stock
£66
19'' Metal Mounting Rack for SCM5B/7B or 8B Backplanes
No stock
£87
DIN Rail Side Element (2 required)
No stock
£4
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the SCM5B392 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

SCM5B392 overview

  • Extends the Distance and Isolates Servo/Motor Controller Signals
  • Provides Isolated Current Loop Interface Between Controller and Motor or Actuator
  • 1kHz Signal Bandwidth
  • Accepts High Level Voltage Inputs up to ±10V
  • Provides High Level Voltage Outputs up to ±10V
  • 1500Vrms Transformer Isolation (3000Vrms Total Loop)
  • ANSI/IEEE C37.90.1 Transient Protection
  • Current Loop is Protected to 240VAC Continuous
  • 100dB CMR
  • ±0.06% Total Loop Accuracy
  • ±0.01% Total Loop Linearity
  • CSA C/US Certified, FM Approved, CE and ATEX Compliant
  • Random Vibration : MIL-STD 202G, Method 214A, Condition 1
  • Swept Sine Vibration : MIL-STD-810G, Method 514.6, modified
  • Shock : MIL-STD-810F. Method 516.5
The SCM5B392 servo/motor controller module set is designed to solve the problem of extending a servo or motor controller signal a long distance with the possibility for noise pickup and/or contacting hazardous voltages. Each SCM5B392 module set is made up of two modules: a voltage input/current output module and a current input/voltage output module.

Custom modules available to exact customer specification.
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Ask us a question

Related products

Customers who bought the SCM5B392 also bought these items
Enquire about the SCM5B392
Need more info or project pricing for the SCM5B392?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Follow us
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!