DSCA47

THERMOCOUPLE INPUT MODULE

DSCA47 - Linearised Thermocouple Input DIN Module, 3Hz Bandwidth

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

DSCA47 Thermocouple Input Module
Featured in:Dataforth Signal Conditioning Modules

Request a quote for this product

Enquiry information  
Your name  
Company name  
Email address  
Telephone  

Add to quote list

Add the DSCA47 to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
DSCA47B-11

DSCA47 with Type B, 500C to 1800C input, 0 to +10V output

DSCA47T-07C

DSCA47 with Type T, 0 to 200C input, 4mA to 20mA output

DSCA47T-07E

DSCA47 with Type T, 0 to 200C input, 0 to 20mA output

DSCA47B-11C

DSCA47 with Type B, 500C to 1800C input, 4mA to 20mA output

DSCA47B-11E

DSCA47 with Type B, 500C to 1800C input, 0 to 20mA output

DSCA47E-08

DSCA47 with Type E, 0 to 1000C input, 0 to +10V output

DSCA47E-08C

DSCA47 with Type E, 0 to 1000C input, 4mA to 20mA output

DSCA47E-08E

DSCA47 with Type E, 0 to 1000C input, 0 to 20mA output

DSCA47J-01

DSCA47 with Type J, 0 to 760C input, 0 to +10V output

DSCA47J-01C

DSCA47 with Type J, 0 to 760C input, 4mA to 20mA output

DSCA47J-01E

DSCA47 with Type J, 0 to 760C input, 0 to 20mA output

DSCA47J-02

DSCA47 with Type J, -100C to 300C input, 0 to +10V output

DSCA47J-02C

DSCA47 with Type J, -100C to 300C input, 4mA to 20mA output

DSCA47J-02E

DSCA47 with Type J, -100C to 300C input, 0 to 20mA output

DSCA47J-03

DSCA47 with Type J, 0 to 500C input, 0 to +10V output

DSCA47J-03C

DSCA47 with Type J, 0 to 500C input, 4mA to 20mA output

DSCA47J-03E

DSCA47 with Type J, 0 to 500C input, 0 to 20mA output

DSCA47K-04

DSCA47 with Type K, 0 to 1000C input, 0 to +10V output

DSCA47K-04C

DSCA47 with Type K, 0 to 1000C input, 4mA to 20mA output

DSCA47K-04E

DSCA47 with Type K, 0 to 1000C input, 0 to 20mA output

DSCA47K-05

DSCA47 with Type K, 0 to 500C input, 0 to +10V output

DSCA47K-05C

DSCA47 with Type K, 0 to 500C input, 4mA to 20mA output

DSCA47K-05E

DSCA47 with Type K, 0 to 500C input, 0 to 20mA output

DSCA47K-13

DSCA47 with Type K, -100C to 1350C input, 0 to +10V output

DSCA47K-13C

DSCA47 with Type K, -100C to 1350C input, 4mA to 20mA output

DSCA47K-13E

DSCA47 with Type K, -100C to 1350C input, 0 to 20mA output

DSCA47K-14

DSCA47 with Type K, 0 to 1200C input, 0 to +10V output

DSCA47K-14C

DSCA47 with Type K, 0 to 1200C input, 4mA to 20mA output

DSCA47K-14E

DSCA47 with Type K, 0 to 1200C input, 0 to 20mA output

DSCA47N-15

DSCA47 with Type N, -100C to 1300C input, 0 to +10V output

DSCA47N-15C

DSCA47 with Type N, -100C to 1300C input, 4mA to 20mA output

DSCA47N-15E

DSCA47 with Type N, -100C to 1300C input, 0 to 20mA output

DSCA47R-09

DSCA47 with Type R, 500C to 1750C input, 0 to +10V output

DSCA47R-09C

DSCA47 with Type R, 500C to 1750C input, 4mA to 20mA output

DSCA47R-09E

DSCA47 with Type R, 500C to 1750C input, 0 to 20mA output

DSCA47S-10

DSCA47 with Type S, 500C to 1750C input, 0 to +10V output

DSCA47S-10C

DSCA47 with Type S, 500C to 1750C input, 4mA to 20mA output

DSCA47S-10E

DSCA47 with Type S, 500C to 1750C input, 0 to 20mA output

DSCA47T-06

DSCA47 with Type T, -100C to 400C input, 0 to +10V output

DSCA47T-06C

DSCA47 with Type T, -100C to 400C input, 4mA to 20mA output

DSCA47T-06E

DSCA47 with Type T, -100C to 400C input, 0 to 20mA output

DSCA47T-07

DSCA47 with Type T, 0 to 200C input, 0 to +10V output

Product
Availability
PWR-PS5R7W

DIN Rail Switching Power Supplies with 7.5W 24V DC power

SCMXRAIL1-02

EN50022-35 Gull Wing DIN Rail, Length 2M

SCMXRAIL2-02

EN50035-G32 G Style DIN Rail, Length 2M

SCMXRAIL3-02

EN50022-35x15 Gull Wing DIN Rail, Length 2M

PWR-PS5R15W

DIN Rail Switching Power Supplies with 15W 24V DC power

PWR-PS5R30W

DIN Rail Switching Power Supplies with 30W 24V DC power

PWR-PS5R60W

DIN Rail Switching Power Supplies with 60W 24V DC power

PWR-PS5R120W

DIN Rail Switching Power Supplies with 120W 24V DC power

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Industry insight.
Network know-how.
Impulse engineers and specialists have the industry insight and network know-how to design forward looking solutions for wide-ranging environments.
Discover our Industrial IoT capabilities

DSCA47 overview

Description
Downloads

Each DSCA47 thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized, and converted to a high level voltage output. Signal filtering is accomplished with a five-pole filter which provides 85dB of normal-mode-rejection at 60Hz and 80dB at 50Hz. An anti-aliasing pole is located on the field side of the isolation barrier, and the other four poles are on the system side. After the initial field-side filtering, the input signal is chopped by a proprietary chopper circuit. Isolation is provided by transformer coupling, again using a proprietary technique to suppress transmission of common mode spikes or surges.

Features
  • Interfaces to Type J, K, T, E, R, S, B, and N Thermocouples
  • Linearises Thermocouple Signal
  • 3Hz Signal Bandwidth
  • Industry Standard Output of either 0-10V, 0-20mA, or 4-20mA
  • 1500Vrms Transformer Isolation
  • ANSI/IEEE C37.90.1 Transient Protection
  • Input Protected to 240VAC Continuous
  • True 3-Way Isolation
  • Wide Range of Supply Voltage
  • 160dB CMR
  • 85dB NMR at 60Hz, 80dB at 50Hz
  • ±0.08% Accuracy
  • Easily Mounts on Standard DIN Rail
  • C-UL-US Listed
  • CE and ATEX Compliant
Enquire about the DSCA47
Need more info or project pricing for the DSCA47?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
 
 
 
 

Similar products to the DSCA47

+44(0)1782 337 800
Join us for our Industrial Tech Solution Day on 16th April! BOOK NOW
+44(0)1782 337 800