The LDM35 signal powered RS-232 line driver is designed to allow video display terminals (VDTs) and other RS-232 devices to be connected over distances sufficient to cover any industrial or institutional complex of buildings. These limited distance modems feature a rugged enclosure small enough to mount on the back panel of VDT units, saving valuable desk and floor space.
The LDM35 RS-232 line driver does not require a power supply for operation. The use of low power circuits and a sensitive optical receiver allows the devices to derive all necessary power from the RS-232 data and control signal. They are designed for full-duplex, asynchronous operation over two, DC-continuity, non-loaded, twisted-wire pairs. Two-wire simplex operation may be accomplished over two wires. The modem circuits and, consequently, the host device are protected from electrical transients due to lightning strikes or operation of heavy industrial equipment.
Features
- Industry leading RS-232 serial line driver from Dataforth
- Ideal for connecting RS-232 devices across long distances
- Offers protection for your serial devices against power spikes and surges
- Common mode isolation up to 500V DC surge
- For data transmission up to 12 miles (20km)
- Full data control lines including RTS, CTS, DTR, DSR
- Full 4-wire duplex or 2-wire simplex mode available
- Available with a pinned male DB25 connector (LDM35-P) or a socketed female DB25 connector (LDM35-S)
- Mounting : In-line Plug in
- Ports : 1 x RS-232
- Common Mode Isolation : 500V surge, 300V continuous
- Power : Signal Powered
- Baud Rate Range : 0 - 19.2Kbps
- Max. Data Distance : 12 miles (20km)
- Modes : 4-wire full duplex, 2-wire simplex
- Channel Lines : TD, RD
- Control Lines : RTS, CTS, DTR, DSR, RLSD
- MTBF : 150,000 hrs
- Operating Temperature : 0C to +70C