MGate 5109

DNP3 GATEWAY

Moxa Fieldbus   •  Fieldbus
MGate 5109 DNP3 gateway
MGate 5109MGate 5109
MGate 5109 - 1 Port Modbus RTU/ASCII/TCP to DNP3 Serial/TCP/UDP Gateway
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
Certified to standards relating to equipment for use in applications subject to explosive atmospheres.
2 MGate 5109 versions available
From
£355

Add to cart / quote list

Buy the MGate 5109 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MGate 5109
MGate 5109 with standard operating temperature (0°C to +60°C)
No stock
£355
MGate 5109-T
MGate 5109 with extended operating temperature (-40°C to +75°C)
No stock
£445
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
45W/2A DIN-rail 24V DC power supply with 85V to 264V AC or 120V to 370V DC input (-10C to +50C)
3 in stock
£50
75W/3.2A DIN-rail 24V DC Power Supply with 85V to 264V AC or 120V to 370V DC input (-10C to +60C)
3 in stock
£78
Mini Female DB9 to Terminal Block
19 in stock
£7
120W/5A DIN-rail 24V DC Power Supply with universal 88 to 132V AC or 176 to 264V AC input by switch, or 248-370V DC (-10C to +60C)
No stock
£84
Wall-mounting Kit, 36mm wide
No stock
£28
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MGate 5109 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MGate 5109 overview

  • Supports Modbus master/slave and DNP3 master/outstation
  • Up to 31 Modbus serial slaves or DNP3 serial outstations
  • Up to 32 Modbus TCP slaves or DNP3 TCP/UDP outstations
  • Supports DNP 3.0 subset level 2
  • DNP3 master mode supports up to 26600 points
  • DNP3 master and outstation modes support time-synchronisation
  • Complete diagnosis information for maintenance
  • Embedded Modbus and DNP3 serial traffic monitor
  • microSD card for configuration backup and system log
  • Serial port with 2kV built-in isolation protection
  • Built-in Ethernet cascading for easy wiring
  • Redundant dual DC power inputs and relay output
  • -40°C to +75°C operating temperature (on -T version)
The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable and offer built-in serial isolation.

The MGate 5109 supports transparent mode for easily integrating Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks.The MGate 5109 series gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage.

Communication issues could be caused by incorrect software parameters, such as slave ID and register address, it also supports agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design of the MGate 5109 makes it suitable for industrial applications such as power, oil & gas, and water & wastewater.

For more information about the MGate 5109 gateway device please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Enquire about the MGate 5109
Need more info or project pricing for the MGate 5109?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Market
Oil and Gas
Ex certified box PCs, comms and screens, plus project support to help you design and develop complete solutions for rig and ship applications.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Follow us
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!