NPort S9650I-16

SERIAL DEVICE SERVER WITH SWITCH

NPort S9650I-16 - 16 Port RS-232/422/485 Rugged Serial Device Server with 4 Port Managed Ethernet Switch
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
IEEE 1613 Environmental and testing requirements for communications networking devices in electric power substations.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
IEC 61850-3 communication standard for electrical substation automation systems in the Power and Energy market.
NPort S9650I-16 Serial Device Server with Switch
NPort S9650I-16NPort S9650I-16NPort S9650I-16NPort S9650I-16NPort S9650I-16
7 NPort S9650I-16 versions available

Add to quote list

Add the NPort S9650I-16 to your quote list to send to our sales team for a quote on all your chosen products
Version filter
No. of LAN ports
Version information
Lead time*
Add to quote list**
NPort S9650I-16-2HV-E-T
NPort S9650I-16 with 16x DB9M serial ports and 4x RJ45 Ethernet ports
NPort S9650I-16-2HV-MSC-T
NPort S9650I-16 with 16x DB9M serial ports, 2x RJ45 Ethernet ports and 2x multi-mode SC fibre ports
NPort S9650I-16-2HV-SSC-T
NPort S9650I-16 with 16x DB9M serial ports, 2x RJ45 Ethernet ports and 2x single-mode SC fibre ports
NPort S9650I-16B-2HV-IRIG-T
NPort S9650I-16 with 16x DB9F serial ports, 2x RJ45 Ethernet ports and IRIG-B time sync
NPort S9650I-16F-2HV-E-T
NPort S9650I-16 with 16x multi-mode ST fibre serial ports and 4x RJ45 Ethernet ports
NPort S9650I-16F-2HV-MSC- T
NPort S9650I-16 with 16x multi-mode ST fibre serial ports, 2x RJ45 Ethernet ports and multi-mode SC fibre ports
NPort S9650I-16F-2HV-SSC- T
NPort S9650I-16 with 16x multi-mode ST fibre serial ports, 2x RJ45 Ethernet ports and single-mode SC fibre ports
Peripheral information
Lead time*
Add to quote list**
DB9 Female to RJ45 Connector
DB9 Female to DB9 Male Serial Cable, 150cm
DB9 Female to DB9 Male Serial Cable, 20cm
8-pin RJ45 CAT5 Ethernet Cable, 100cm
DB9(F) to RJ45 (10-pin) Cable
Mini Female DB9 to Terminal Block
* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

NPort S9650I-16 overview

  • Supports up to 4x managed Ethernet switch ports (fibre available with some optional network modules)
  • 16-port RS-232/422/485 serial interface
  • Supports DNP3 and Modbus protocols
  • Ethernet redundancy with Turbo Ring/Chain and RSTP/STP supported
  • Real COM/TTY drivers for Windows and Linux
  • IEC 61850-3, IEEE 1613 (power substations) compliant
  • IEEE 1588v2 and IRIG-B time synchronization functions
  • Supports IEC 61850 MMS protocol
  • Security features based on IEC 62443/NERC CIP
  • -40°C to +85°C extended operating temperature
The NPort S9650I-16 16-port serial device server comes with a fully functioning built-in 4-port managed Ethernet switch is designed specifically for the harsh environments found in electrical substations. By combining the Ethernet switch and serial device server, the NPort S9650I's serial devices can be easily installed, maintained and managed. The Nport S9650I-16 has an extended wide operating temperature range of -40°C to +85°C and galvanised steel housing with dual power supplies for redundancy and accepts a high voltage power input of 88V to 300V DC and 85V to 264V AC. 

The NPort S9650I-16 uses power SCADA to control and monitor both comms devices (switches, routers, etc.) and Intelligent Electronic Devices (IEDs) with the MMS protocol compared to the more traditional approach of using SNMP for comms devices and MMS for IEDs. Furthermore, NPort S9650I range are the world’s first device servers to integrate MMS into an IT-type device designed specifically for power SCADA applications. The NPort S9650I even supports using MMS to monitor serial communications between the S9650I and legacy devices.

The NPort S9650I-16 is designed to integrate Modbus TCP, ASCII and RTU devices in almost any master/slave combination including simultaneous serial and Ethernet masters. Moreover, NPort S9650I-16 serial device servers also supports protocol conversion between DNP3 serial and DNP3 IP, and all models are ruggedly constructed to ensure reliable operation.

The NPort S9650I-16 has security features based on IEC 62443/NERC CIP to provide a high level of cybersecurity. Protecting mission-critical networks from cyberattacks is a high priority for industrial automation applications which can suffer large losses due to extended network downtime. IEEE 1588v2 is used as a time source and converted to IRIG-B for distribution to the IEDs via the serial ports or via a dedicated IRIG-B BNC connector. 

The NPort S9650I-16 integrates a full-function NPort device server with an industrial switch to carry serial and Ethernet devices at the same time. In addition, the NPort S9650I-16 offers ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2 redundancy protocols. 

For more information about the NPort S9650I-16 rugged serial device server please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Enquire about the NPort S9650I-16
Need more info or project pricing for the NPort S9650I-16?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
GET AN INSTANT QUOTE OR TECH SUPPORT - CHAT NOW
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!