SCM7B22

VOLTAGE OUTPUT MODULE

SCM7B22 - Voltage Output 7B Module, 400Hz Bandwidth

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

CSA Approved

CSA certification indicates that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognised document used as a basis for certification.

FM Approved

FM approved certification is a standard set by FM Global. Industrial and commercial companies around the world rely on products and services that are FM approved and specification tested to protect their properties from loss. The FM APPROVED mark, which is backed by scientific research and testing, advises customers that the product conforms to the highest standards.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

SCM7B22 Voltage Output Module
Featured in:Dataforth Signal Conditioning Modules

Request a quote for this product

Enquiry information  
Your name  
Company name  
Email address  
Telephone  

Add to quote list

Add the SCM7B22 to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
SCM7B22

Voltage Input Module (-10 to +10V input, -10 to +10V output)

Product
Availability
SCMXBE

DIN Rail Base Element without Snap Foot

29 in stock
Next day delivery i
SCMXVS

DIN Rail Connection Pins (4 required)

48 in stock
Next day delivery i
PWR-PS5R7W

DIN Rail Switching Power Supplies with 7.5W 24V DC power

SCM7BP01

Single Channel 7B Backpanel with CJC

SCM7BP01-DIN

Single Channel 7B Backpanel with DIN rail mount, CJC

SCM7BP02

Dual Channel 7B Backpanel with CJC

SCM7BP02-DIN

Dual Channel 7B Backpanel with DIN rail mount, CJC

SCM7BP04

4 Channel 7B Backpanel with CJC

SCM7BP04-DIN

4 Channel 7B Backpanel with DIN rail mount, CJC

SCM7BP08

8 Channel 7B Backpanel with CJC

SCM7BP16

16 Channel 7B Backpanel with CJC

SCM7BP16-DIN

16 Channel 7B Backpanel with DIN rail mount, CJC

SCM7BPT

Non-Isolated Pass Thru Module

SCM7BXCA01

6'' Adapter Cable for SCM7B Backpanels

SCM7BXCA02

3' Interface Cable for SCM7B Backpanels

SCM7BXEV

Analog Module Evaluation Board

SCM7BXR1

Current Conversion Resistor

SCMXBEFE

DIN Rail Base Element with Snap Foot

SCMXCA006-01

Interface Cable for 8B Backplanes with 1M length

SCMXCA006-02

Interface Cable for 8B Backplanes with 2M length

SCMXCA006-07

Interface Cable for 8B Backplanes with 7M length

SCMXIF

Universal Interface Board for SCM5B/7B Backpanels with no DIN rail mount

SCMXIF-DIN

Universal Interface Board for SCM5B/7B Backpanels with DIN rail mount

SCMXRAIL1-02

EN50022-35 Gull Wing DIN Rail, Length 2M

SCMXRAIL2-02

EN50035-G32 G Style DIN Rail, Length 2M

SCMXRAIL3-02

EN50022-35x15 Gull Wing DIN Rail, Length 2M

SCMXRK-002

19'' Metal Mounting Rack for SCM5B/7B or 8B Backplanes

SCMXSE

DIN Rail Side Element (2 required)

PWR-PS5R15W

DIN Rail Switching Power Supplies with 15W 24V DC power

PWR-PS5R30W

DIN Rail Switching Power Supplies with 30W 24V DC power

PWR-PS5R60W

DIN Rail Switching Power Supplies with 60W 24V DC power

PWR-PS5R120W

DIN Rail Switching Power Supplies with 120W 24V DC power

SCM7BP08-DIN

8 Channel 7B Backpanel with DIN rail mount, CJC

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Industry insight.
Network know-how.
Impulse engineers and specialists have the industry insight and network know-how to design forward looking solutions for wide-ranging environments.
Discover our Industrial IoT capabilities

SCM7B22 overview

Description
Downloads

The SCM7B22 range of voltage output modules accept input signals in the ±10V range from the process control system. The signal is isolated, buffered, and filtered to provide a unity gain field voltage output.

Features
  • Accepts High Level Input to ±10V
  • Provides High Level Output to ±10V
  • 400Hz Signal Bandwidth
  • 1500Vrms Transformer Isolation
  • Accuracy, ±0.03% of Span Typical, ±0.1% Max
  • ANSI/IEEE C37.90.1 Transient Protection
  • Output Protected to 120Vrms Continuous
  • Input Protected to ±35VDC
  • Noise, 2mV Peak (5MHz), 1mV RMS (100kHz)
  • CMRR, 100dB
  • 80dB Per Decade of Attenuation Above 400Hz
  • Easy DIN Rail Mounting
  • CSA C/US Certified
  • CE and ATEX Compliant
Enquire about the SCM7B22
Need more info or project pricing for the SCM7B22?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
 
 
 
 

Similar products to the SCM7B22

+44(0)1782 337 800
Join us for our Industrial Tech Solution Day on 16th April! BOOK NOW
+44(0)1782 337 800