SCM7B30

VOLTAGE INPUT MODULE

Dataforth Signal Conditioning Modules  •  Signal Conditioners
SCM7B30 Voltage Input Module
SCM7B30 - Voltage Input 7B Module, 3Hz Bandwidth
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
CSA certification indicates that a product, process or service has been tested to a Canadian or U.S. standard and it meets the requirements of an applicable CSA standard or another recognised document used as a basis for certification.
FM approved certification is a standard set by FM Global. Industrial and commercial companies around the world rely on products and services that are FM approved and specification tested to protect their properties from loss. The FM APPROVED mark, which is backed by scientific research and testing, advises customers that the product conforms to the highest standards.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
21 SCM7B30 versions available
From
£115

Add to cart / quote list

Buy the SCM7B30 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version information
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
SCM7B30-01
SCM7B30 with 0 to +10mV input, +1V to +5V output
£115
SCM7B30-01A
SCM7B30 with 0 to +10mV input, 0 to +5V output
£115
SCM7B30-01D
SCM7B30 with 0 to +10mV input, 0 to 10V output
£115
SCM7B30-02
SCM7B30 with 0 to +100mV input, +1V to +5V output
£115
SCM7B30-02A
SCM7B30 with 0 to +100mV input, 0 to +5V output
£115
SCM7B30-02D
SCM7B30 with 0 to +100mV input, 0 to +10V output
£115
SCM7B30-03
SCM7B30 with 0 to +1V input, +1V to +5V output
£115
SCM7B30-03A
SCM7B30 with 0 to +1V input, 0 to +5V output
£115
SCM7B30-03D
SCM7B30 with 0 to +1V input, 0 to +10V output
£115
SCM7B30-05
SCM7B30 with +1V to +5V input, +1V to +5V output
£115
SCM7B30-05A
SCM7B30 with +1V to +5V input, 0 to +5V output
£115
SCM7B30-05D
SCM7B30 with +1V to +5V input, 0 to +10V output
£115
SCM7B30-06
SCM7B30 with -10mV to +10mV input, +1V to +5V output
£115
SCM7B30-06A
SCM7B30 with -10mV to +10mV input, 0 to +5V output
£115
SCM7B30-06D
SCM7B30 with -10mV to +10mV input, 0 to +10V output
£115
SCM7B30-07
SCM7B30 with -100mV to +100mV input, +1V to +5V output
£115
SCM7B30-07A
SCM7B30 with -100mV to +100mV input, 0 to +5V output
£115
SCM7B30-07D
SCM7B30 with -100mV to +100mV input, 0 to +10V output
£115
SCM7B30-08
SCM7B30 with -1V to +1V input, +1V to +5V output
£115
SCM7B30-08A
SCM7B30 with -1V to +1V input, 0 to +5V output
£115
SCM7B30-08D
SCM7B30 with -1V to +1V input, 0 to +10V output
£115
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
DIN Rail Base Element without Snap Foot
30 in stock
£11
DIN Rail Connection Pins (4 required)
49 in stock
£3
DIN Rail Switching Power Supplies with 7.5W 24V DC power
£56
DIN Rail Switching Power Supplies with 15W 24V DC power
£81
DIN Rail Switching Power Supplies with 30W 24V DC power
£106
DIN Rail Switching Power Supplies with 50W 24V DC power
£130
DIN Rail Switching Power Supplies with 100W 24V DC power
£255
Single Channel 7B Backpanel with CJC
£49
Single Channel 7B Backpanel with DIN rail mount, CJC
£67
Dual Channel 7B Backpanel with CJC
£72
Dual Channel 7B Backpanel with DIN rail mount, CJC
£87
4 Channel 7B Backpanel with CJC
£176
4 Channel 7B Backpanel with DIN rail mount, CJC
£191
8 Channel 7B Backpanel with CJC
£282
8 Channel 7B Backpanel with DIN rail mount, CJC
£298
16 Channel 7B Backpanel with CJC
£444
16 Channel 7B Backpanel with DIN rail mount, CJC
£458
6'' Adapter Cable for SCM7B Backpanels
£31
3' Interface Cable for SCM7B Backpanels
£50
Analog Module Evaluation Board
£138
DIN Rail Base Element with Snap Foot
£11
Interface Cable for 8B Backplanes with 1M length
£35
Interface Cable for 8B Backplanes with 2M length
£40
Interface Cable for 8B Backplanes with 7M length
£60
Universal Interface Board for SCM5B/7B Backpanels with no DIN rail mount
£82
Universal Interface Board for SCM5B/7B Backpanels with DIN rail mount
£88
EN50022-35 Gull Wing DIN Rail, Length 2M
£66
EN50035-G32 G Style DIN Rail, Length 2M
£103
EN50022-35x15 Gull Wing DIN Rail, Length 2M
£66
19'' Metal Mounting Rack for SCM5B/7B or 8B Backplanes
£87
DIN Rail Side Element (2 required)
£4
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the SCM7B30 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

SCM7B30 overview

  • Accepts Millivoltage and Voltage Level Signals
  • 3Hz Signal Bandwidth
  • Provides High Level Voltage Outputs
  • 1500Vrms Transformer Isolation
  • Accuracy, ±0.03% of Span Typical, ±0.1% Max
  • ANSI/IEEE C37.90.1 Transient Protection
  • Input Protected to 120Vrms Continuous
  • Noise, 500µV Peak (5MHz), 250µV RMS (100kHz)
  • CMR, up to 160dB
  • NMR, up to 85dB
  • Easy DIN Rail Mounting
  • CSA Certified
  • CE and ATEX Compliant
Each SCM7B30 voltage input module accepts one channel of analog voltage input which is filtered, isolated, amplified, and converted to a high level analog voltage for output to the process control system.
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Ask us a question

Related products

Customers who bought the SCM7B30 also bought these items
Enquire about the SCM7B30
Need more info or project pricing for the SCM7B30?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!