Moxa 4 Port RS-232/422/485 Ethernet Serial Device Server:out Power Adapter, 0°C to +55°C

Moxa 4 Port RS-232/422/485 Ethernet Serial Device Server:out Power Adapter, 0°C to +55°C in No Colour

NPort 5450 Series - Moxa 4 Port RS-232/422/485 Ethernet Serial Device Server:out Power Adapter, 0°C to +55°C

NPORT 5450I-T
NPORT 5450
NPORT 5450 W/ ADAPTER
NPORT 5450-T
NPORT 5450I
NPORT 5450I W/ ADAPTER

View options

Description
Downloads
Datasheet

View All Serial Device Servers

Who We Are

Impulse Embedded is a leading provider of Industrial computing systems and solutions. Our customers rely on us to provide the best embedded computing products and solutions for the challenges presented by today’s industrial demands. Together with our global manufacturing partners we provide world-class innovative embedded computing and automation products and solutions suitable for multiple industrial market sectors.

Not found what you're looking for?

We're only a phone call away. Contact us for more information or for personalised help with your project.

Description
Downloads
Datasheet
Delivery & Returns

Need Help? Call: +44 (0)1782 337 800

NPort 5400 device servers can conveniently and transparently connect up to 4x serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralise the management of your serial devices, and distribute management hosts over the network.

NPort 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort 5400 operates independently to provide maximum versatility. for example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.

An LCD panel is built into the NPort 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide temperature models).

NPort 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power input gives users greater flexibility for use with different applications.

The NPort 5400 series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort 5400 has 4x sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.

For more information about the NPort 5450 please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Datasheet

Delivery & Returns

We offer a range of delivery options to suit your needs, please contact our friendly team for more information.

Wireless Solution Saves Time and Reduces Overheads for OT Machinery Monitoring Project

Our customer was looking for ways to improve efficiency and reliability, and reduce operation costs and overheads for their manufacturing facility. The initial step in this transformation was to add additional monitoring and measurements to several areas of their facility to allow the collection of usage data from older machinery for analysis. The machinery to be analysed would be located in many areas of the complex, with some sitting in concrete outbuildings far from the source of the main network.