ADAM-3016 is a DIN-rail mountable strain gauge input signal conditioning module with 1000V DC three-way isolation between input, output and power. The switch configurable input and output offers flexible, wide ranging capabilities for strain gauge.
ADAM-3016 is equipped with a power LED to monitor the line power, DC-to-DC converter status and three VR (ZERO, SPAN, EXCI) to calibrate input/output range and excitation voltage.
For more information about the ADAM-3016 please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Features
- DIN-rail mountable strain gauge module
- 1000V DC three-way optical isolation
- Switch configurable mV and V inputs, and voltage and current outputs
- I/O :
- Accuracy : ±0.1% of full range
- Bandwidth : 2.4kHz (typical)
- Isolation mode rejection : >100dB @ 50Hz/60Hz
- Current output : Current (0mA to 20mA)
- Current load resistor: 0 to 500 ohm (source)
- Stability : 150 ppm (typical)
- Voltage specification : Electrical input (±10mV, ±20mV, ±30mV, ±100mV), excitation voltage (1V to 30V DC @ 60mA max)
- Voltage output : Bipolar (±5V, ±10V), unipolar (0V to 10V), impedance (<50 ohm)
- General :
- Connectors : Screw terminal
- Enclosure : ABS
- Indicators : Power LED indicators
- Isolation : 1000V DC (three-way)
- Power consumption : 1.85W (voltage output), 2.15W (current output)
- Power input : 24V DC ±10%
- Operating temperature : -10°C to 70°C
- Storage temperature : -25°C to +85°C