EKI-5528-PN

MANAGED PROFINET SWITCH

EKI-5528-PN - 8 Port Entry-Level Managed Industrial Ethernet Switch with PROFINET
ManufacturingProcess Control and SCADA
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
EKI-5528-PN managed PROFINET switch
Featured in:DIN-Rail Switches•Advantech Ethernet Switches
3 EKI-5528-PN versions available

Add to quote list

Add the EKI-5528-PN to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Lead time*
Request qty / trade pricing**
EKI-5528I-PN-AE
EKI-5528-PN with extended operating temperature (-40°C to +75°C)
Request L/T
Get qty / trade pricing
EKI-5528-PNMA-AE
EKI-5528-PN with wide operating temperature and MRP master switch (-10°C to +60°C)
Request L/T
Get qty / trade pricing
EKI-5528-PN-AE
EKI-5528-PN with wide operating temperature (-10°C to +60°C)
This product is now end of life. Please contact us however, as we may be able to source small quantities or arrange OEM quantity production runs with the factory if required. Impulse can also assist you in upgrading your requirement to a new long-term platform.
Request L/T
Get qty / trade pricing
* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

EKI-5528-PN overview

  • Entry-Level managed PROFINET switch
  • 8x Fast Ethernet 10/100 RJ-45 ports
  • UL, Class1 Div 2 and ATEX certified
  • IXM function enables fast deployment
  • Provides GSDML files
  • Management: SNMP v1/v2c/v3, WEB, Standard MIB, Private MIB
  • Supports Media Redundancy Protocol (MRP Slaves) (For MRP Master see -PNMA version)
  • Supports IPV6
  • 6-pin screw terminal block power connector
  • DIN-rail mount
  • 5 year warranty
  • Extended -40°C to +75°C operating temperature (on -I version)
  •  
The EKI-5528-PN is a new generation of entry-level managed switch. It supports media redundancy protocols and meets the PROFINET real time standard. The devices come with a compact metal housing that is IP30 rated to protect against dusty industrial environments. The wide power input (8.4V to 52.8V DC) is designed to operate in areas of unstable power and rugged environments.

The EKI-5528-PN is available to purchase directly from Impulse as an approved Advantech partner. For more information about the EKI-5528-PN, please contact our technical sales team on +44 (0)1782 337 800, or alternatively submit an enquiry.
EKI-5528-PN Datasheet
Enquire about the EKI-5528-PN
Need more info or project pricing for the EKI-5528-PN?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Market
Manufacturing
Innovative industrial devices and support for manufacturers and integrators.
READ MORE
Application
Process Control and SCADA
Integrated device and machine connectivity solutions.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!