IMC-101G

FIBRE MEDIA CONVERTER

Media Converters
IMC-101G Fibre Media Converter
IMC-101GIMC-101G
IMC-101G - 1 Port Gigabit Ethernet to Single/Multi Mode SC/ST Fibre Industrial Media Converter
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
These products use heatsink, heatpipe and extrusion technology to dissipate the heat generated by the system rather than using traditional fans thus improving system reliability and longevity.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
4 IMC-101G versions available
From
£309

Add to cart / quote list

Buy the IMC-101G online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
IMC-101G
IMC-101G with standard operating temperature (0°C to +60°C)
£309
IMC-101G-T
IMC-101G with wide operating temperature (-40°C to +75°C)
£360
IMC-101G-IEX
IMC-101G with IECEx certification and standard operating temperature (0°C to +60°C)
£355
IMC-101G-T-IEX
IMC-101G with IECEx certification and wide operating temperature (-40°C to +75°C)
£413
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
45W/2A DIN-rail 24V DC power supply with 85V to 264V AC or 120V to 370V DC input (-10C to +50C)
3 in stock
£48
75W/3.2A DIN-rail 24V DC Power Supply with 85V to 264V AC or 120V to 370V DC input (-10C to +60C)
3 in stock
£75
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSX with LC connector, 0.5km with standard operating temperature (0°C to +60°C)
5 in stock
£95
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLX with LC connector, 10km with extended operating temperature (-40°C to +85°C)
11 in stock
£199
120W/5A DIN-rail 24V DC Power Supply with universal 88 to 132V AC or 176 to 264V AC input by switch, or 248-370V DC (-10C to +60C)
£91
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 10km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)
£210
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 10km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)
£456
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 20km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)
£377
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 20km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)
£781
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 40km, TX 1310nm, RX 1550nm with standard operating temperature (0°C to +60°C)
£971
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 40km, TX 1550nm, RX 1310nm with standard operating temperature (0°C to +60°C)
£1069
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseEZX with LC connector, 110km (0°C to +60°C)
£1241
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseEZX with LC connector, 120km (0°C to +60°C)
£1487
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLH with LC connector, 30km with standard operating temperature (0°C to +60°C)
£215
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLHX with LC connector, 40km with standard operating temperature (0°C to +60°C)
£522
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLSX with LC connector, 2km with standard operating temperature (0°C to +60°C)
£181
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLX with LC connector, 10km with standard operating temperature (0°C to +60°C)
£169
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseZX with LC connector, 80km with standard operating temperature (0°C to +60°C)
£870
Wall-mount kit, 2 pcs of plate, 8 screws
£5
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 10km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)
£254
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 10km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)
£498
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 20km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)
£418
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 20km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)
£823
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 40km, TX 1310nm, RX 1550nm with extended operating temperature (-40°C to +85°C)
£1012
WDM Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSFP with LC connector, 40km, TX 1550nm, RX 1310nm with extended operating temperature (-40°C to +85°C)
£1111
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLH with LC connector, 30km with extended operating temperature (-40°C to +85°C)
£245
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLHX with LC connector, 40km with extended operating temperature (-40°C to +85°C)
£555
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseLSX with LC connector, 2km with extended operating temperature (-40°C to +85°C)
£224
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseSX with LC connector, 0.5km with extended operating temperature (-20°C to +75°C)
£129
Small Form Factor Pluggable Transceiver, 1 Port 1000BaseZX with LC connector, 80km with extended operating temperature (-40°C to +85°C)
£900
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the IMC-101G to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

IMC-101G overview

  • Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)
  • 10/100/1000BaseT(X) Gigabit Ethernet and 1000BaseSFP fibre slot supported
  • Link Fault Pass-through (LFP)
  • Power failure, port break alarm by relay output
  • Redundant 24V DC power input
  • -40°C to +75°C operating temperature (on -T versions)
The IMC-101G industrial Gigabit modular media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media conversion in harsh industrial environments.

The IMC-101G’s industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter comes with a relay output warning alarm to help prevent damage and loss.

All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0°C to +60°C, and an extended operating temperature range of  -40°C to +75°C.

For more information about the IMC-101G media converter please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now

Related products

Customers who bought the IMC-101G also bought these items
Enquire about the IMC-101G
Need more info or project pricing for the IMC-101G?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Market
Oil and Gas
Ex certified box PCs, comms and screens, plus project support to help you design and develop complete solutions for rig and ship applications.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!