ioLogik 2542

IOLOGIK 2542IOLOGIK 2542-T

ANALOG DIGITAL IO MODULE

ioLogik 2542 - Smart Ethernet Remote 4 Channel Isolated Analog Input/12 Digital I/O Module with Click&Go Plus

5 Year Warranty

These products come with a standard five year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

DIN-rail mountable

These devices have been designed to be mounted directly on to an industry standard DIN-rail.

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

ioLogik 2542 Analog Digital IO Module
ioLogik 2542ioLogik 2542Click&Go Plus
From
£660
Free delivery to UK mainland addressesFeatured in:Moxa ioLogik Remote I/O ShopAnalog Distributed IO

Add to cart / quote list

Buy the ioLogik 2542 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
Price
IOLOGIK 2542

ioLogik 2542 with wide operating temperature (-10°C to +60°C)

1-4
£660
FREE DELIVERYBUY
IOLOGIK 2542-T

ioLogik 2542 with extended operating temperature (-40°C to +75°C)

1-4
£769
FREE DELIVERYBUY
Product
Availability
Price
WK-51-01

Wall-mounting Kit, 51mm wide

1-4
£14
All prices exclude VAT at current rate.
Minimum order value - £30 (exc. VAT and delivery).
Free delivery of the ioLogik 2542 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

ioLogik 2542 overview

Description
Downloads

The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2x serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices.

One of the Ethernet ports can be used to link to 8x daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses.

The new Click&Go Plus control logic now supports up to 48x rules with further upgrades to 8x onditions/actions. In addition, its graphical user interface provides 3x logic gates and 3x multi-layers, helping you build more powerful and efficient IO solutions. Once you finish setting up your Click&Go Plus logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus rules before uploading them to your online devices. Peer-to-peer (P2P) mode is widely used for industrial applications.

Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically.

The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8x ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network.

IOxpress integrates a user-friendly interface with offline/online configuration, allowing you to configure every I/O parameter offline, and then upload the settings to your online devices, greatly reducing the time and cost needed to manage and configure your IO solutions.

The ioLogik 2500 supports micro SD cards with up to 32GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2x serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network.

The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is be easier, since you won’t need to worry about DCOM settings.

In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur.

For more information about the ioLogik 2542 please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an

  • Front-end intelligence with Click&Go Plus control logic, up to 48x rules
  • Active communication with MX-AOPC UA Server
  • Automatically complement disconnection period data with MX-AOPC UA Logger software
  • 4-port unmanaged switch built in for linking to Ethernet devices
  • I/O expansion port for daisy chaining up to 8x ioLogik E1200 units
  • 3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field
  • Supports SNMPv1/v2c/v3
  • Simplify I/O management with MXIO library for Windows or Linux platforms
  • 9V to 48V DC
  • -30°C to +70°C operating temperature (on -T version)
  • Enquire about the ioLogik 2542
    Need more info or project pricing for the ioLogik 2542?
    T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
     
     
     
     

    Similar products to the ioLogik 2542

    +44(0)1782 337 800
    Join us for our Industrial Tech Solution Day on 16th April! BOOK NOW
    +44(0)1782 337 800