MGate 5103

MODBUS TO PROFINET GATEWAY

Moxa Fieldbus   •  Fieldbus
MGate 5103 Modbus to PROFINET Gateway
MGate 5103 Front
MGate 5103 - 1 Port Modbus RTU/ASCII/TCP/EtherNet/IP to PROFINET Gateway
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
Certified to standards relating to equipment for use in applications subject to explosive atmospheres.
2 MGate 5103 versions available
From
£351

Add to cart / quote list

Buy the MGate 5103 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MGate 5103
MGate 5103 with standard operating temperature (0°C to +60°C)
No stock
£351
MGate 5103-T
MGate 5103 with extended operating temperature (-40°C to +75°C)
No stock
£439
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
Mini Female DB9 to Terminal Block
17 in stock
£7
DB9 Female to DB9 Male Serial Cable, 150cm
No stock
£12
DB9 Female to DB9 Male Serial Cable, 20cm
No stock
£8
Non-locking Barrel Plug to Bare Wires
No stock
£3
8-pin RJ45 to DB9 Female Cable (150mm)
No stock
£7
RJ45 to DB9 Female Serial Shielded Cable, 150cm length
No stock
£5
MGate 5103 DIN-rail Mounting Kit
No stock
Wall-mounting Kit, 36mm wide
No stock
£28
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MGate 5103 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MGate 5103 overview

  • Protocol conversion between Modbus RTU/ASCII/TCP or EtherNet/IP and PROFINET
  • 2x RJ45 Ethernet ports
  • 1x RS-232 serial console RJ45 port
  • 1x RS-232/422/485 DB9 serial port
  • MicroSD card support up to 32GB for configuration backup and event logging
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring and diagnostic tools
  • Redundant dual DC power inputs and relay output supported
  • Effortless configuration via web-based wizard
  • Security features based on IEC 62443
  • Wide 12V to 48V DC power input
  • Extended -40°C to +75°C operating temperature option (on -T version)
The MGate 5103 from Moxa is an industrial Ethernet gateway, DIN-rail mountable ruggedised and certified for use in hazardous locations(ATEX Zone 2, Class 1 Division 2) the MGate 5103 converts Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network communications for the integration of existing Modbus devices into a PROFINET network. You can use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect and exchange data with PROFINET devices.

The MGate 5103 series comes with a Quick Setup guide to make configuration easy. Using Quick Setup you can access protocol conversion modes and complete the set up in just a few steps. The MGate 5103 also supports a GSDML export function allowing GSDML files to be imported into PROFINET PLCs to save time on PLC configuration.

For more information about the MGate 5103 Ethernet gateway device please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
Enquire about the MGate 5103
Need more info or project pricing for the MGate 5103?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Application
IIoT
We offer a range of solutions to connect devices from the world of operational technology to people, cloud analytics and other 'things'. This is the Industrial Internet of Things.
READ MORE
Market
Manufacturing
Innovative industrial devices and support for manufacturers and integrators.
READ MORE
GET AN INSTANT QUOTE OR TECH SUPPORT - CHAT NOW
Follow us
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!