MGate 5114

INDUSTRIAL MODBUS ETHERNET GATEWAY

MGate 5114 - 1 Port Modbus RTU/ASCII/TCP/IEC 101 to IEC 104 Gateway
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.
These devices have been designed to be mounted directly on to an industry standard DIN-rail.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
Certified to standards relating to equipment for use in applications subject to explosive atmospheres.
MGate 5114 Industrial Modbus Ethernet Gateway
MGate 5114 front rightMGate 5114 front
Featured in:x86 Single Board Computers (x86 SBC)DIN-Rail SwitchesCapacitive Touch Screens
2 MGate 5114 versions available
From
£339

Add to cart / quote list

Buy the MGate 5114 online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version information
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MGate 5114
MGate 5114 with standard operating temperature (0°C to +60°C)
£339
MGate 5114-T
MGate 5114 with extended operating temperature (-40°C to +75°C)
£424
Peripheral information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
Mini Female DB9 to Terminal Block
25 in stock
£7
DB9 Female to DB9 Male Serial Cable, 150cm
£12
DB9 Female to DB9 Male Serial Cable, 20cm
£8
Non-locking Barrel Plug to Bare Wires
£3
8-pin RJ45 to DB9 Female Cable (150mm)
£7
RJ45 to DB9 Female Serial Shielded Cable, 150cm length
£5
MGate 5103 DIN-rail Mounting Kit
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MGate 5114 to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MGate 5114 overview

  • Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104
  • Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
  • Supports IEC 60870-5-104 client/server
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Embedded traffic monitor
  • MicroSD card for configuration backup and system log
  • Serial port with 2kV built-in isolation protection
  • Built-in Ethernet cascading for easy wiring
  • Redundant dual DC power inputs and relay output
  • Extended -40 to 75°C operating temperature model available (-T version)
  • Security features based on IEC 62443
The MGate 5114 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP/IEC 101 to IEC 104 protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable and offer built-in serial isolation.

MGate 5114 gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage as traffic logs can be viewed in the troubleshooting tool, Wireshark. Using this feature, you can analyse traffic to determine the root cause of a problem.

For more information about the MGate 5114 IEC 104 gateway device please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Enquire about the MGate 5114
Need more info or project pricing for the MGate 5114?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!