NE-4120A

ETHERNET SERIAL DEVICE SERVER

Serial Device Servers
NE-4120A Ethernet Serial Device Server
NE-4120A - 10/100Mbps Ethernet Embedded RS-422/485 Serial Device Server with 5-pin header
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
These products come with a standard five year manufacturer warranty.
3 NE-4120A versions available
From
£30

Add to cart / quote list

Buy the NE-4120A online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version filter
Operating temperature
Version information
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
NE-4120A
NE-4120A with standard operating temperature (0°C to +55°C)
Request L/T
£30
Get qty / trade pricing
Add to cart
NE-4120A-T
NE-4120A with extended operating temperature (-40°C to +75°C)
Request L/T
£46
Get qty / trade pricing
Add to cart
NE-4120-ST
NE-4120A with starter Kit for NE-4120S/NE-4120A (module not included)
Request L/T
£45
Get qty / trade pricing
Add to cart
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the NE-4120A to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

NE-4120A overview

  • Half the size of a credit card - only 57mm x 40mm
  • 10/100Mbps Ethernet interface
  • RS-422/485 device support
  • Up to 230.4Kbps baudrate support
  • Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
  • DHCP, BootP, Static IP, and ARP supported
  • SNMP and e-mail alerts for event trapping and notification
  • Low power consumption at 1.5W, with single +5V input
  • -40°C to +75°C operating temperature (on -T version)
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time.

The NE-4100 embedded device servers support 10/100Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

SNMP and E-mail Alerts for Event Trap and Notification:

NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
  • Cold/warm start
  • Password authentication failure
  • Change in DSR/DCD line signal
  • Change in IP address
  • Change in password

For more information about the NE-4120A please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
NE-4120A Datasheet
Need a helping hand?
Our networking FAEs are trained to the highest level, so not only do we sell products but we can show you how to configure and troubleshoot using best practice. If you want to know more give us a try.
Ask us a question
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Enquire now
Network configuration support
Do you need some help to pre-configure your switches, maybe you need help setting up security or using network management software. Tell us what you need and we will gladly help.
Enquire now

Related products

Customers who bought the NE-4120A also bought these items
UPort 1450
USB to 4 Port RS-232/422/485 (DB9) Serial Adapter
Enquire about the NE-4120A
Need more info or project pricing for the NE-4120A?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
Application
Machine Building
Our products and solutions for Machine Builders.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!