Moxa 1 Port Isolated Industrial CANbus to Multi-Mode ST Fibre Converter, 0°C to +60°C

The ICF-1170I series of industrial CAN-to-fibre converters are used to convert CAN signals from copper to optical fibre. The converters come with 2kV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.

Fibre Test Mode can be used to test the fibre cable between two ICF-1170I units, and provides a simple way to determine if the fibre cable is transmitting data correctly. When in Fibre Test Mode, the fibre transceiver (TX) will continuously send out a data signal and the “Fibre TX” LED will light up. On the other side of the connection, when the ICF-1170I fibre transceiver (RX) receives the data signal form the TX side, the “Fibre RX” LED will light up.

For more information about the ICF-1170I converter please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features

• Transmits up to 2km over optical fibre
• Converts CAN signals to fibre and fibre to CAN signals
• Baudrate up to 1Mbps
• DIP switch for 120ohm terminal resistance
• DIP switch for fibre test mode
• LEDs for Fibre TX, Fibre RX, Power 1, Power 2
• Fully compatible with the ISO 11898 standard
• Dual power inputs for redundancy
• 12V to 48V DC power input
• -40°C to +85°C operating temperature (on -T version)