EXPC-F2150W

ATEX PANEL MOUNT PANEL PC

EXPC-F2150W - 15.6" FHD Intel 11th Gen Core i7/i5/i3/Celeron Front IP66 ATEX Panel-mount Panel PC with DP, VGA, 4x Gigabit Ethernet, 3x COM, 4x USB, and zone 2 certifications for hazardous locations

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

Linux

This product supports Linux based kernels. See product datasheet and manual for a list of compatible Linux kernels and distributions (for development and pre-sales support please contact our technical sales team).

Front IP66 rated

The IP rating determines what level of protection a product has against the intrusion of solid objects, water, dust and liquids. This device is IP66 protected at the front meaning that certain parts are dust tight and protected from powerful water jets at certain angles. To offer complete all round protection the device should be mounted in a suitably protective enclosure or panel.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

3 Year Warranty

These products come with a standard three year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

High Brightness

This device uses high brightness LEDs, meaning it can be viewed in environments with bright ambient light, such as broad daylight.

Windows 10

This system can be supplied with Windows 10 configured to your specification, including disk partitioning, driver and software installations, along with Windows feature setup and application-specific configuration.

Windows 11

This system can be supplied with Windows 10 configured to your specification, including disk partitioning, driver and software installations, along with Windows feature setup and application-specific configuration.

IECEx

Certified to standards relating to equipment for use in applications subject to explosive atmospheres.

EXPC-F2150W ATEX Panel Mount Panel pc
EXPC-F2150W rear over viewEXPC-F2150W rearEXPC-F2150W front rightEXPC-F2150W rear i/o

Request a quote for this product

Enquiry information  
Your name  
Company name  
Email address  
Telephone  

Add to quote list

Add the EXPC-F2150W to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
EXPC-F2150W-TL1-DC

EXPC-F2150W with Intel Celeron 6305E processor and 9V to 36V DC input

EXPC-F2150W-TL3-DC

EXPC-F2150W with Intel Core i3-1115G4E processor and 9V to 36V DC input

EXPC-F2150W-TL5-DC

EXPC-F2150W with Intel Core i4-1145G7E processor and 9V to 36V DC input

EXPC-F2150W-TL7-DC

EXPC-F2150W with Intel Core i7-1185G7E processor and 9V to 36V DC input

EXPC-F2150W-TL1-AC

EXPC-F2150W with Intel Celeron 6305E processor and 100V to 240V AC input

EXPC-F2150W-TL3-AC

EXPC-F2150W with Intel Core i3-1115G4E processor and 100V to 240V AC input

EXPC-F2150W-TL5-AC

EXPC-F2150W with Intel Core i4-1145G7E processor and 100V to 240V AC input

EXPC-F2150W-TL7-AC

EXPC-F2150W with Intel Core i7-1185G7E processor and 100V to 240V AC input

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics
Fully Integrated Panel PC Systems

Need an Integrated System?

With pre-qualified systems such as VELA:HMI, or completely customised systems for OEMs, our range of integrated Touch Panel PCs and HMIs suit a wide range of engineering needs.

Give us a brief and our Design Engineers will pull together a solution using their Industry Insight and Technology Know-how. We'll talk you through the options, understand your application, then put forward a bespoke proposal for you within your desired timeframe.

Learn more

EXPC-F2150W overview

Specification
Description
Downloads
CPU
Intel Tiger Lake Core i7/ i3 or Celeron processor
System Memory
16GB DDR4 SO-DIMM pre-installed
Screen Size
15.6"
Resolution
1920 x 1080 (FHD)
Brightness
1200 cd/m
Aspect Ratio
16:9
Touch Screen Options
PCAP touch
Function Keys
N/A
Storage
1x M.2 B-KEy, 1x CFast slot
Wireless Connections
Optional Cellular and WiFi
Ethernet
4x 10/100/1000Mbps (RJ45)
PoE
N/A
COM
3x RS-232/422/485 (DB9)
USB
2x USB3.0 (Type-A), 2x USB2.0 (Type-A)
Expansion
1x M.2 B-key, 1x M.2 2230 E-key
Display Output
1x DisplayPort, 1x VGA
Power Supply
9V to 36V DC or 100V to 240V AC
Dimensions (W x H x D)
403.99mm x 274.48mm x 99mm
Weight (net/gross)
6.9kg
Operating Temperature
-40°C to +70°C
Protection Rating
Front IP66
Market Certifications
CE, FCC, UL C1D2/C2D2, ATEX, and IECEx ZONE 2/Zone 22 compliant
OS Support
Win 10 IoT, Win 11, Linux
Mounting
Panel mount
The EXPC-F2150W ATEX panel mount panel PC features a 15.6-inch display powered by an Intel 11th Gen. Core i processor. Designed as a robust and adaptable solution for industrial, hazardous, and mission-critical settings. Equipped with a comprehensive range of communication interfaces, including DisplayPort and VGA outputs, it caters to various industrial application needs.

Featuring a fanless design, the EXPC-F2150W operates flawlessly in temperatures spanning from -40° to 70°C. Its streamlined enclosure facilitates efficient heat dissipation, ensuring reliability in harsh outdoor environments such as oil and gas fields, drilling platforms, power stations, and smart heater solutions. Additionally, tailored for outdoor use, it incorporates sunlight-readable attributes such as a 1200-nit LCD panel, glove-friendly projected-capacitive multi-touch screen, optical bonding, and anti-glare design, enhancing user experience in outdoor applications.
Enquire about the EXPC-F2150W
Need more info or project pricing for the EXPC-F2150W?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
 
 
 
 

Similar products to the EXPC-F2150W

+44(0)1782 337 800
Happy Holidays from Impulse! Please note that we will be closed for the holiday period from 20th December, and will reopen on 2nd January. Our last shipping date of the year to customers will be 18th December 2024.
+44(0)1782 337 800