MAQ20-DODC20SK

DISCRETE OUTPUT MODULES

Dataforth MAQ20  •  Data Acquisition Systems
MAQ20-DODC20SK discrete output modules
MAQ20-DODC20SK - Discrete Output Module; 20-channel, High Density Isolated Voltage
CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.
This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.
Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.
The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.
The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.
These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.
ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.
From
£290

Add to cart / quote list

Buy the MAQ20-DODC20SK online or add it to your quote list to send to our sales team for a quote on all your chosen products
Version information
Stock
Lead time*
1 off price**
Request qty / trade pricing**
Buy now
MAQ20-DODC20SK
Discrete Output Module; 20-channel, High Density Isolated Voltage, 10V to 60V DC, 3A output per channel
No stock
£290
All prices exclude VAT at current rate.
Minimum order value - £50 (exc. VAT and delivery).
Free delivery of the MAQ20-DODC20SK to UK Mainland on orders over £150 (exc. VAT and delivery) when purchasing online - excludes Northern Ireland, Isle of Man, Isle of Wight, Scottish Islands and the Channel Islands.

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)

MAQ20-DODC20SK overview

  • 20 Isolated Discrete Output Channels with User Configurable Default Output States
  • Channels Switch up to 60V DC Signals and Sink up to 3A Current
  • Channels Switched Individually or in Blocks
  • 1500Vrms Output-to-Bus Isolation
  • 150Vrms Channel-to-Channel Isolation
  • Each Channel Protected up to 60V DC Continuous Overload
  • User Defined Logic Polarity
  • Fast Switching Times
  • Field Output Connections Use Spring Cage Terminal Blocks
  • Low Cost per Channel
  • Extended -40°C to +85°C operating temperature
The MAQ20-DODC20SK module has 20 isolated discrete output channels that can switch up to 60V DC signals and sink up to 3A of current. Channels can be switched individually or in block format. User configurable default output states which are set upon power up or module reset ensure failsafe operation for critical applications. Logic polarity can be user defined as standard or inverted.

The isolated field outputs are designed for harsh industrial environments and have fast switching times. Field output
connections are made through high density spring cage terminal blocks. Output-to-bus isolation is a robust 1500Vrms and each individual channel is protected up to 60V DC continuous overload in case of inadvertent wiring errors.

150Vrms channel-to-channel isolation gives the module the ability to control equipment with or without common signal grounds or different pieces of equipment with multiple reference potentials. The high channel count within the narrow module package gives exceptional functionality while preserving valuable mounting space. The high density minimises cost per channel resulting in economical control solutions.

All MAQ20 modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise commonly present in heavy industrial environments.

For more information about the MAQ20-DODC20SK please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
OPC-UA
OPC-UA is supported by many of our communication and I/O products. If you are interested but not quite sure how to implement OPC-UA into your factory then get in touch.
Ask us a question
Enquire about the MAQ20-DODC20SK
Need more info or project pricing for the MAQ20-DODC20SK?
T: +44 (0)1782 337 800 • E: SALES@IMPULSE-EMBEDDED.CO.UK
We want you to be the first to know about new products, technology solutions and exclusive industry news. To stay connected and receive marketing communications, select YES. (Remember, you are free to unsubscribe at any time.)

 
News
Dataforth receive honourable mention in engineers choice awards
Dataforth
Impulse partner, Dataforth have received ‘Honourable Mention’ in the hardware- data acquisition category in Control Engineering’s 2018 Engineers’ choice awards program for their MAQ20-DODC20SK module.
READ MORE
LIVE CHAT OFFLINE (OPEN UK 8:30AM-5:00PM MON - FRI)
Your Favourites
Wherever you see this heart symbol around the site, you can click to add things like products, articles and more to your favourites.
Build a quote list
Are you after more than one product, or need quantity pricing? Add products to your quote list and send it through to our team in one go!