The NPort 5600 is a 19" rackmount serial ethernet device server with 8 serial RS-232 RJ45 ports. It allows you to centralise the management of multiple serial devices over a network. Easy to and effective way to connect upto 8 Serial devices to your existing ethernet network. The serial Tx/Rx LED's and ethernet LED's on the front make it easy for engineers to monitor the status of attached devices.
The RJ45 ports on the back of the 19" server make installation into existing rackmounts systems simple and easy to maintain. Real COM/TTY drivers make the serial ports on the NPort 5600 recognisable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
Dip switches on the bottom panel allows engineers to set the termination resistors to prevent serial signal reflection to high or low depending the requirements. termination and pull high/low resistor values.
For more information about the NPort 5610-8 Ethernet serial device server please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.
Features
- 8x serial RJ45 ports supporting RS-232
- Standard 19-inch rackmount size
- 10/100M auto-sensing RJ45 Ethernet
- Tx/Rx status LED's for serial and Ethernet
- Dip switches for configuring termination resistance
- Easy IP address configuration with LCD panel
- Configure via Telnet/Web/Windows utility
- Socket modes: TCP server/TCP client/UDP/Real COM
- SNMP MIB-II for network management
- Universal high-voltage range: 100V to 240V AC
- Popular low-voltage range: ±48 VDC (20V to 72V DC, -20V to -72V DC)
- 0°C to +55°C operating temperature