Computing
Displays
Networking
DAQ & Control
Solutions
About Us
Full Gigabit modular managed rackmount switch – 4× 1G SFP uplinks – up to 28× Gigabit ports via modules – dual 110/220 VDC/VAC inputs – IEC 61850-3 & IEEE 1613 – hardware 1588v2 PTP – Extended wide -40 to 75°C operation
Moxa Products Supplied To the UK, From the UK
As an official UK distributor of Moxa products since 2014, we at Impulse are proud to be affiliated with Moxa Technical College. Our partnership enables us to provide comprehensive in-house training and first-line technical support, and our team of Industrial Internet of Things (IIoT) specialists are fully equipped to guide you through every step of the process. Whether you require assistance with installation, troubleshooting or anything else, our team is ready to assist you.
Technical Support from Impulse
Our commitment doesn't end with the initial setup—we provide lifelong technical support for the entire range of Moxa products at no extra charge. Count on us to ensure that your network operates at its peak performance throughout its entire lifespan.
The RKS-G4028-4GS-2HV-T maximises availability for fibre-rich backbones with dual isolated 110/220 VDC/VAC power inputs and four fixed 1G SFP uplinks. Three modular bays let you mix copper, SFP, and FX interfaces to scale toward 28 Gigabit ports as your topology grows or segments consolidate. The result is a future-proof chassis that adapts from aggregation to dense distribution without redesign.
Built for substations and harsh sites, the switch meets IEC 61850-3 and IEEE 1613 with robust EMC immunity, fanless IP30 construction, and a -40 to 75°C operating envelope. Hardware 1588v2 PTP enables precise synchronisation for protection and measurement. Turbo Ring/Chain provides <20 ms convergence at scale, while STP/RSTP/MSTP, LACP, Loop Protection, and Dual-Homing/Ring Coupling enable layered, resilient designs.
Security and compliance follow IEC 62443-aligned development: secure boot chain, 802.1X, RADIUS/TACACS+, SSH/HTTPS, ACLs, sticky MAC, MAB, and policy controls. Deterministic delivery is preserved with eight hardware queues, VLAN/GVRP, QoS/DSCP, and IGMP Snooping/Querier for multicast containment.
Operations are simplified with web/CLI management, SNMPv1/v2c/v3 with traps/informs, RMON, LLDP, Syslog, SFTP/TFTP, relay alarms, and optional ABC-02/03 tools for rapid configuration and firmware handling.
If your application demands fibre uplinks, dual-HV redundancy, and modular growth—across substations, traction power, or wide-area plant rings—the RKS-G4028-4GS-2HV-T delivers resilient, standards-based switching at scale.
Delivery & Returns
We offer a range of delivery options to suit your needs.
UK Mainland
Northern Ireland & Highlands
Ireland
RMA
In order to process returned goods, Impulse Embedded Limited uses an internal RMA system. Before returning goods for any reason, please contact Impulse Embedded Limited (returns@impulse-embedded.co.uk) to request an RMA number. Please confirm the reason for the return of the goods, providing the Serial Number, Product Code, and Impulse Embedded Limited Invoice Number (if known).
When returning goods, please ensure they are suitably packed so as to avoid damage, are in the original packaging, along with all accessories, with the outer packaging marked with the RMA number. It is recommended that you use a signed delivery service, as goods lost in transit are not the responsibility of Impulse Embedded Limited.
Please do not write the RMA number on the goods or on the original packaging. Impulse Embedded Limited may refuse returned goods and return them if they arrive without an RMA number, or not in the original packaging.
Moxa 28 Port Gigabit Modular Managed Ethernet Switch – 4x Gigabit SFP Ports – Redundant 2x 110V to 220V AC Input
Please complete the details below to receive your quote
Select the quantity you wish to request pricing or lead time information for:
RKS-G4028-4GS-2HV-T
28 Port Gigabit Modular Managed Ethernet Switch – 4x Gigabit SFP Ports – Redundant 2x 110V to 220V AC Input
London Underground signalling engineers required a number of panel PCs for temporary use as in-cab Signal Interface Displays (SIDs) in test trains, to allow the engineers to test the information being sent to the train from the new Thales computer-based signalling system.