EDS-510E

EDS-510E-3GTXSFP-TEDS-510E-3GTXSFP

MANAGED INDUSTRIAL ETHERNET SWITCH

EDS-510E - 7 Port + 3 Port GB/SFP Managed Industrial Gigabit Ethernet Switch

5 Year Warranty

These products come with a standard five year manufacturer warranty.

ATEX approved

ATEX is the name commonly given to the European Directive 94/9/EC, also known as ATEX 95 or ATEX Equipment Directive. The regulation applies to all equipment intended for use in explosive atmospheres, whether electrical or mechanical, including protective systems. There are two categories of equipment 'I' for mining and 'II' for surface industries. The directive covers a large range of equipment, potentially including electrical equipment used on fixed offshore platforms, in petrochemical plants, mines, flour mills and other areas where a potentially explosive atmosphere may be present.

CE

CE is a mandatory standard for products on the market in the European Economic Area. By CE marking a product, the manufacturer ensures that the item meets the essential safety requirements set out in the applicable CE directive.

Class 1 Division 2 Certified

The National Electrical Code (NEC) defines hazardous environments as areas “where fire or explosion hazards may exist due to flammable gases, vapours, liquids, dust or particles”. When such materials are found in the atmosphere of an area, a potential for explosion exists, which could be ignited if an electrical or other source of ignition is present. As defined by the classification authorities, certified devices are suitable for installation and operation within a Class 1, Division 2 environment. Class 1 environments are areas where there is a presence of flammable gases or vapours in the air, such as natural gas or petroleum vapour. Facilities including oil rigs, refineries, gas plants and automotive repair centres all fall within this category.

DNV

DNV (Stiftelsen Det Norske Veritas) is a Norwegian classification with the objective of "safeguarding life, property and the environment". The core competence of DNV is to identify, assess and advice on how to manage risk. This product passes strict DNV approvals and have been designed to be used specifically in the marine market.

EN 50121

EN 50121 Industrial standard for Railway Networking and Communication products

Extended Wide Temperature

These products utilise high quality industrial grade components enabling them to work in extended wide temperature environments. They are capable of running below -20C and above +70C and offer further protection than standard wide temperature rated products.

FCC Approved

The Federal Communications Commission (FCC) is an independent agency of the United States government that sets standards and governs the testing of conducted and radiated emissions such as EMI.

IEC 61850-3

IEC 61850-3 communication standard for electrical substation automation systems in the Power and Energy market.

IEEE 1613

IEEE 1613 Environmental and testing requirements for communications networking devices in electric power substations.

NEMA TS2

NEMA TS2 is a standard for traffic control assemblies, such as traffic lights, emergency road condition and pedestrian signs. The standard is designed for manufacturers to meet or exceed a set of minimum requirements. For more information see http://www.nema.org/Products/Pages/Transportation-Management-Systems-And-Associated-Control-Devices.aspx

RoHS

This product fully adheres to the Restriction of Hazardous Substances Directive 2002/95/EC, RoHS for short.  The directive covers the restriction of use of certain hazardous substances in electrical and electronic equipment and was adopted in February 2003 by the European Union.

UL

Underwriters Laboratories (UL) is an independent product safety certification organisation based in the United States. UL develops standards for products, materials, components, assemblies, tool and equipment, mainly dealing with product safety.

Wide Voltage

These devices and systems have been designed to accept a wide voltage DC power input. This feature is desirable in the industrial market where a fixed voltage level or mains AC power cannot be guaranteed.

EDS-510E : IN STOCK : Managed Industrial Ethernet Switch
EDS-510EEDS-510E
Featured in:MOXA EDS - Buy onlineMoxa Ethernet SwitchesManaged EDS Switches

Request a quote for this product

Enquiry information  
Your name  
Company name  
Email address  
Telephone  

Add to quote list

Add the EDS-510E to your quote list to send to our sales team for a quote on all your chosen products
Product
Availability
EDS-510E-3GTXSFP

EDS-510E with wide operating temperature (-10°C to +60°C)

EDS-510E-3GTXSFP-T

EDS-510E with extended operating temperature (-40°C to +75°C)

Product
Availability
HDR-60-24

Ultra Slim DIN-rail Power Supply with 85V to 264V AC input and 24V DC @ 2.5A output

3 in stock
Next day delivery i
MDR-40-24

Industrial DIN-rail Power Supply with 85V to 264V AC input and 24V DC @ 1.7A output

9 in stock
Next day delivery i
SFP-1FEMLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX multi-mode LC port (4km)

2 in stock
Next day delivery i
SFP-1GSXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseSX, LC port, 0.5km (0°C to +60°C)

6 in stock
Next day delivery i
SFP-1GSXLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseSX, LC port, 0.5km (-40°C to +85°C)

4 in stock
Next day delivery i
SFP-1GLXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseLX, LC port, 10km (0°C to +60°C)

2 in stock
Next day delivery i
SFP-1GLXLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseLX, LC port, 10km (-40°C to +85°C)

5 in stock
Next day delivery i
ABC-02-USB

Configuration Backup and Restoration Tool for Moxa EDS Managed Ethernet Switches (-10°C to +60°C)

MDR-60-24

Industrial DIN-rail Power Supply with 85V to 264V AC input and 24V DC @ 2.5A output

NDR-120-24

Industrial DIN-rail Power Supply with 90V to 264V AC input and 24V DC @ 5A output

RK-4U

4U 19” Rack-mounting Kit

WK-51-01

Wall-mounting Kit, 51mm wide

SFP-1FELLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX single-mode LC port (80km)

SFP-1GZXLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseZX, LC port, 80 km (-40°C to +85°C)

SFP-1FESLC-T

1 Port Fast Ethernet SFP Module with 100BaseFX single-mode LC port (40km)

SFP-1GEZXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseEZX, LC port, 110km (0°C to +60°C)

SFP-1GEZXLC-120

1 Port Gigabit Ethernet SFP Module with 1000BaseEZX, LC port, 120km (0°C to +60°C)

SFP-1GLSXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseSX+, LC port, 2km (0°C to +60°C)

SFP-1GLSXLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseSX+, LC port, 2km (-40°C to +85°C)

SFP-1GLHLC

1 Port Gigabit Ethernet SFP Module with 1000BaseLH, LC port, 30km (0°C to +60°C)

SFP-1GLHLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseLH, LC port, 30km (-40°C to +85°C)

SFP-1GLHXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseLHX, LC port, 40km (0°C to +60°C)

SFP-1GLHXLC-T

1 Port Gigabit Ethernet SFP Module with 1000BaseLHX, LC port, 40km (-40°C to +85°C)

SFP-1GZXLC

1 Port Gigabit Ethernet SFP Module with 1000BaseZX, LC port, 80 km (0°C to +60°C)

* Lead time is indicative and is subject to change at time of ordering. Next business day delivery on in-stock products only (when ordered before 3pm).
** Contact us for quantity or project pricing.
† Additional delivery charge may be incurred for certain postcodes (calculated at checkout)
Impulse is an official Moxa distributor
Direct UK RMA
Free technical support
Moxa Certified Trainers
Impulse is an Official UK Moxa Distributor and part of the Moxa Technical College with in-house specialists, including:
  • Moxa Certified Engineers for assistance with network topology design and installation support for your project
  • Moxa Certified Trainers offering you specialised technical training in all Moxa products, saving valuable time and money when designing and supporting Moxa technology in your next project
Impulse has over 7 years of experience of supplying and supporting Moxa products in the UK, offering:
  • Industry insight and technology know-how for your specific industry and applications
  • First line pre- and post-sales technical and sales support over the lifetime of your project
  • Fast and direct RMA and repair support with in-house testing and diagnostics

EDS-510E overview

Description
Downloads

The EDS-510E Gigabit managed Ethernet switch is designed to meet rigorous mission critical applications, such as factory automation, ITS and process control. The 3x Gigabit Ethernet ports allows great flexibility to build up a Gigabit redundant Turbo Ring and a Gigabit uplink.

The switch adopts USB interfaces for switch configuration, system file backup, and firmware upgrade, making it easier to manage.

For more information about the EDS-510E please contact our technical sales team on +44 (0)1782 337 800 or alternatively submit an enquiry.

Features
  • Command Line Interface (CLI) for quickly configuring major managed functions
  • IPv6 Ready logo awarded (IPv6 Logo Committee certified)
  • Software-based IEEE 1588 PTPv2 (Precision Time Protocol) for precise time synchronisation of networks
  • DHCP Option 82 for IP address assignment with different policies
  • Supports EtherNet/IP, PROFINET, and Modbus/TCP protocols for device management and monitoring
  • Turbo Ring and Turbo Chain (recovery time < 20ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • IGMP snooping and GMRP for filtering multicast traffic
  • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
  • QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
  • Port Trunking for optimum bandwidth utilisation
  • RADIUS, TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
  • SNMPv1/v2c/v3 for different levels of network management
  • RMON for efficient network monitoring and proactive capability
  • Bandwidth management prevents unpredictable network status
  • Lock port function for blocking unauthorised access based on MAC address
  • Automatic warning by exception through e-mail, relay output
  • Configurable by web browser, Telnet/USB console, CLI, MXconfig, and ABC-02 automatic backup configurator
  • -40°C to +75°C operating temperature (on -T version)
Enquire about the EDS-510E
Need more info or project pricing for the EDS-510E?
T: +44 (0)1782 337 800 • E: sales@impulse-embedded.co.uk
 
 
 
 

Similar products to the EDS-510E

+44(0)1782 337 800
+44(0)1782 337 800